Kenny, There is not a specific measurement called out in the J-STD-001B. I have a copy of a comparison report between IPC-A-610 and J-STD-001 that explains what is covered in one that is not covered in the other. If anyone would like a copy, just let me know. Joshua Forrester Burnett Technical Training Center 512-459-1110 fax 451-4727 [log in to unmask] >>> Kenny Bloomquist <[log in to unmask]> 12/15/98 09:52AM >>> I am trying to find the lead protrusion requirements in J-STD-001. Either I'm missing it or it "ain't" there. IPC-A-610 says visible to 1.5mm but can't find it in 001. Thanks, Ken Bloomquist Sr. Principal Process Engineer PRIMEX Aerospace Company P.O. Box 97009 Redmond, WA 98073-9709 www.primextech.com Ph: 425-885-5000 FAX: 425-882-5786 [log in to unmask] Northcon/98, Show Director <www.northcon.org> Electronics Manufacturers Association (EMA), Secretary <www.ema-wa.org> ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################ ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################