It would seem that some have taken offense to my comments, which were only intended to mean that we really do want good info ,not that we werent getting it. -----Original Message----- From: Blakley Peggi J CNIN [SMTP:[log in to unmask]] Sent: Wednesday, December 30, 1998 11:09 AM To: [log in to unmask] Subject: Re: [TN] Legends of the TechNet My compliments to Jerry- well put buddy! Stand Tall! -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Jerry Cupples Sent: Wednesday, December 30, 1998 12:24 PM To: TechNet Subject: Re: [TN] Legends of the TechNet Bob Cochran said: >I would hope that this so called legend group actually is a group that has >the ability and knowledge to come up with intelligent and informative >information. Not a group of desk jockeys with little or none actual hands >on experience. What the industry needs (board builders) is the direction >that the OEM's are planning to lead us down and if they have a clue what >the impact is going to be to us. We will be watching!! A couple of years ago, the TechNet was a fairly new thing. The subscribers would ask questions, some of us with a bit of time on their hands or the willingness to stay until 7 PM would answer questions we found interesting. The popularity of the whole mail list increased, the number and range of questions, and the number of responses. Some of this may take the form of "noise" if one chooses to be critical. Someone at IPC arbitrarily picked about five frequent TechNet posters, asked us if we would participate in a panel discussion at the IPC conference in Naples, Florida, and we were called "Legends". Speaking personally, I disclaim "legendary" status, and I believe those other speakers to be more qualified than I; but: My advice and answers here are unaffected by commercial motivations. Most of them are correct, and based on production experience in the industry over twenty years. I have never been in sales. I think that the other "legends" can make the very same claims. The information which can be found in free postings here is more extensive, timely, and valuable than that which was (or will be) presented in any panel discussion, but is NOT intended (at least from me) to move the entire industry or establish any long range trends. But you will have to accept some dross with the pure alloy, I'm afraid. You must make your own decisions about whose advice is good, there is no moderation here. The IPC people who dreamed this up this "TechNet Legend" stuff for the conference chose at least passably well, and if they do it again, you will get straight answers to your questions, which is all that should be expected. regards, Jerry Cupples Interphase Corporation Dallas, TX USA http://www.iphase.com ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################ ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################ ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################