I just can't resist :

Ken some of my fabricating friends (hard to believe, I know) have been
(in my previous life, as Tom's say) at one time printing silk screen
almost 0.5mm high for similar reasons (covering via's below crystals)
If you stretch your local fabricating friends to limits on  viscosities
; you'll get your problems solved .
Otherwise ; get yourself one of those Bob's : Wave Soldering With Zero
Defects : book of thieves ;
that should help also :
http://www.bobwillis.co.uk
Email : [log in to unmask]

See you

Paul Klasek
http://www.resmed.com

> ----------
> From:         Ken Fong[SMTP:[log in to unmask]]
> Sent:         Tuesday, 3 November 1998 2:06
> To:   [log in to unmask]
> Subject:      [TN] solder resist between solder land to prevent solder
> bridging
>
>      Tehcnetters,
>
>      Could anyone advise the source of anything (solder resist,or
> other
>      chemicals,etc.,) that can be printed in between closely located
> solder
>      lands, such as those for SOIC or DIP packages, so that solder
> bridging
>      between these lands during wavesoldering can be prevented or
>      minimized?
>
>      Thanks for your help in advance.
>
>      Regards,
>      KenF, Nov 2,98
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
> 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
> section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################