Check out www.ccrco.com, they make a slick little dip/flood system that eliminates the need for masking uncoated areas. They also have a good removal system for those repair jobs Mike McMonagle PCA Process Engineering Supervisor K*Tec Electronics 1111 Gillingham Lane Sugar Land, TX 77478 (281) 243-5639 Phone (281) 243-5539 Fax [log in to unmask] > -----Original Message----- > From: Ed Holton [SMTP:[log in to unmask]] > Sent: Thursday, October 29, 1998 8:38 AM > To: [log in to unmask] > Subject: [TN] conformal coat machines > > We are looking for a small dip conformal coat machine with > curing/drying > capability. By small, i mean something reasonable size, not one of > those > 10'x10'x10' monsters I use to use. Spraying is not an option at this > time > because both sides of the board need to be coated > > Any suggestions, > > Thanks > > Ed Holton > Hella Electronics > > ################################################################ > TechNet E-Mail Forum provided as a free service by IPC using LISTSERV > 1.8c > ################################################################ > To subscribe/unsubscribe, send a message to [log in to unmask] with > following text in the body: > To subscribe: SUBSCRIBE TechNet <your full name> > To unsubscribe: SIGNOFF TechNet > ################################################################ > Please visit IPC's web site (http://www.ipc.org) "On-Line Services" > section for additional information. > For technical support contact Hugo Scaramuzza at [log in to unmask] or > 847-509-9700 ext.312 > ################################################################ ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################