what is actually happening. I had a problem that is similar I think. I had to make sure the clearance settings wer set properly on a per net basis. Scott -----Original Message----- From: Scott Buscomb [mailto:[log in to unmask]] Sent: Wednesday, October 14, 1998 10:25 AM To: [log in to unmask] Subject: Re: [DC] RS274X format problem I have had problems reading in PADS PowerPCB generated positive drawn planes into CAM350. I have not been able to resolve the problem except to use RS274-D format on the files that have the problem. Try messing with the arc interpolation setting (set to quadrant) if possible. This worked with a VeriBest problem I had in the past. Scott -- Scott Buscomb, Senior Designer [log in to unmask] Techsonic Industries Inc. Humminbird/Zercom Marine Electronics 1111 Alderman Dr. Ste. 250 Alpharetta, GA 30005 770 475-3020 ext.1032 http://www.humminbird.com Dennis Ward wrote: > Hello, > > The fab house I'm using has encountered a problem importing my RS274X artwork. > I believe their software is having a hard time compositing(?) the power plane layers. > I'm still unsure what exactly is happening - I plan on visiting them tomorrow and see > first hand. > > My software (output) - Allegro designer - version 13 > Theirs (Input) - Tibor Davos - version unknown. > > Has anyone else experienced any difficulties with RS274X formatted power and ground planes > generated from Allegro?? > > Any (I do mean ANY) help would be appreciated. > > Thanks > Dennis Ward > Net to Net Technologies > > ################################################################ > DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c > ################################################################ > To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: > To subscribe: SUBSCRIBE DesignerCouncil <your full name> > To unsubscribe: SIGNOFF DesignerCouncil > ################################################################ > Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. > For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 > ################################################################ ################################################################ DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE DesignerCouncil <your full name> To unsubscribe: SIGNOFF DesignerCouncil ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################ ################################################################ DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE DesignerCouncil <your full name> To unsubscribe: SIGNOFF DesignerCouncil ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################