Guys/Gals/and those Undecided Our PCB's are normally supplied to us with an ESD susceptibility symbol label affixed. Note the word normally, a supplier has sent in a batch without this label. QA are now bugging me to reject as a non conformance. I think this is uneccessary as the contract doesn't call it up, they though are insisting that IPC-A-610rev B (which we ask the subbie to work to) makes this label a requirement......i disagree. Anybody want to take my side (or any QA ers want to close ranks). As always thanks in advance Regards Ian Squires Senior Production Engineer ------------------------------------------------------- Graseby Dynamics Ltd A Smiths Industries Company Park Avenue, Bushey, Watford, Herts, WD2 2BW Web Site: www.gradyn.co.uk Phone: 01923-228566 xt 295 Fax: 01923-221361 E-mail: [log in to unmask] Registered in England no. 480992 Registered office: 765 Finchley Road, London, NW11 8DS ------------------------------------------------------- ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################