On 21 Sep 98 at 15:04, Paul Arklay wrote: > I wondered if anyone could tell me if there is a standard for smt > polarised component orientation and if so where to find it. All standards which deal with component orientation write "SHOULD be parallel" etc. etc., none writes SHALL, and for my feeling, this is sometimes an esthetical question which is against the electrically perfect placement of the components. I for myself prefer the shortest possible wiring, and my assembly subcontractors can live with polarised components in different orientations. Regards Matthias Mansfeld ----------------------------------------------- Matthias Mansfeld Elektronik * Printed Circuit Board Design and Assembly Am Langhoelzl 11, D-85540 Haar, GERMANY Phone: +49-89-4620 0937, Fax: +49-89-4620 0938 E-Mail: [log in to unmask] Internet: http://home.t-online.de/home/matthias.mansfeld ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################