Earl,

Been there, done that.....we 'drained' the molten solder into containers
that would form the solder into sizeable chunks that could be 'dropped' into
the new pot. It is the long way around, but it worked for us at the time.

I am assuming the 'old' pot is heatable....if not......'never mind'!

Richard Hamilton
Clemar Mfg. / Rain Bird
[log in to unmask]

> -----Original Message-----
> From: Earl Moon [SMTP:[log in to unmask]]
> Sent: Friday, September 18, 1998 9:06 AM
> To:   [log in to unmask]
> Subject:      [TN] Seho Wave Soldering Process Procedures
>
> We have our Seho 2135F almost ready to run. Have a few questions
> concerning operating tips, startup procedures, do's and dont's, safety,
> etc.
>
> Also would like to know, as our solder pots were damaged during shipping
> (750 and 950 kg - wonder why the damage), what the best way to get the
> old solder out of the damaged pots and into the new ones.
>
> Any information greatfully received,
>
> Earl Moon
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
> section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################