Russ, The reason we set our own standard is that we couldn't find one out there! And, yes, I do beleive it is a problem. regards, Bev > ---------- > From: Russ Winslow[SMTP:[log in to unmask]] > Sent: Thursday, September 03, 1998 8:47 PM > To: [log in to unmask] > Subject: Re: [TN] Ionograph / Cleanliness Requirement for Components > > Bev, Pat and other TechNet folks, > > It was a loaded question. > > Unless I'm mistaken there is no industry standard, Not Mil-Std-883, Not > Mil-PRF-38535, Not in EIA, Nor JEDEC that requires components to be clean > when you receive them. > > Am I all wet here? Does this seem like a problem to anyone? > > Someone please prove me wrong! > > -----Original Message----- > From: Bev Christian <[log in to unmask]> > To: 'TechNet E-Mail Forum.' <[log in to unmask]>; 'Russ Winslow' > <[log in to unmask]> > Date: Thursday, September 03, 1998 4:29 AM > Subject: RE: [TN] Ionograph / Cleanliness Requirement for Components > > > >Russ, > >Excellent question. I, too, would like to know what other companies set > for > >criteria on this, especially no-clean flux users. We require the same > level > >of cleanliness as the industry sets for bare boards, 1 SOD. > > > >regards, > >Bev Christian > >Nortel > > > >> ---------- > >> From: Russ Winslow[SMTP:[log in to unmask]] > >> Sent: Wednesday, September 02, 1998 2:31 PM > >> To: [log in to unmask] > >> Subject: [TN] Ionograph / Cleanliness Requirement for Components > >> > >> Do any of you TechNet folks know of a standard cleanliness requirement > for > >> components? By this I mean Ionograph type of test requirements. I've > >> seen > >> them for bare boards and finished assemblies. > >> > >> ################################################################ > >> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV > 1.8c > >> ################################################################ > >> To subscribe/unsubscribe, send a message to [log in to unmask] with > >> following text in the body: > >> To subscribe: SUBSCRIBE TechNet <your full name> > >> To unsubscribe: SIGNOFF TechNet > >> ################################################################ > >> Please visit IPC's web site (http://www.ipc.org) "On-Line Services" > >> section for additional information. > >> For technical support contact Hugo Scaramuzza at [log in to unmask] or > >> 847-509-9700 ext.312 > >> ################################################################ > >> > > > > ################################################################ > TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c > ################################################################ > To subscribe/unsubscribe, send a message to [log in to unmask] with > following text in the body: > To subscribe: SUBSCRIBE TechNet <your full name> > To unsubscribe: SIGNOFF TechNet > ################################################################ > Please visit IPC's web site (http://www.ipc.org) "On-Line Services" > section for additional information. > For technical support contact Hugo Scaramuzza at [log in to unmask] or > 847-509-9700 ext.312 > ################################################################ > ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################