Hello Techies,

This may be a little off topic but here goes:

I'm looking for a standard (IEEE preferred, but anything
would be fine) for high voltage, high current testing or
more properly, characterizing, of a transformer like coil. A
high voltage pulse would be applied to an inductive device
under test. The inductor would have a test capacitance
across it and after the pulse was applied, the ring down
current and voltage would be monitored as a signature
profile is looked for. The purpose is to look for turn to
turn shorts which appear only under high voltage operating
conditions. Standard HiPot tests don't apply since we are
looking for turn to turn faults which. Simple resistance
tests don't apply either since the fault only appears under
high current conditions. We are trying to develop a test
whithout requireing our vendor to purchase high current
continuos wave amplifiers.



Thanks in advance,

Paul Orlando
[log in to unmask]

############################################################
####
TechNet E-Mail Forum provided as a free service by IPC using
 LISTSERV 1.8c
############################################################
####
To subscribe/unsubscribe, send a message to [log in to unmask]
 with following text
in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
############################################################
####
Please visit IPC's web site (http://www.ipc.org) "On-Line
Services" section for additional information.
For technical support contact Hugo Scaramuzza at
[log in to unmask] or 847-509-9700
ext.312
############################################################
####