Hi The company I work for has, in its possession, the afore mentioned Panasert screen printer, model number NM 2624G. This model of screen printer only has provisions for eight different programs to be stored in its memory at any one given time. Good, if you only require eight or less different stencils to be used. Not so good if you have more. What I intend to do is connect the Panasert to a PC and store the information on the PC which has a much greater capacity and download the information to the Panasert on a as needed basis ( I have been told this is possible ). I am aware that the Panasert has a floppy disk drive, but for various reasons ( Number one being that ours is poked ) I do not wish to use this. Does anybody have any documentation outlining the format that the Panasert screen printers use to upload and download their information. Many Thanks. Mike Fitzgerald Production Engineering Mobile Radio Division Tait Electronics Ltd. ------------------------------------------------------ 558 Wairakei Road, PO Box 1645 Christchurch, New Zealand. Direct Phone: (64)(3) 358 6663 Fax: (64)(3) 358 3603 Mobile: (025) 228 7068 Email: [log in to unmask] Internet: http://www.tait.co.nz ------------------------------------------------------ ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################