Nick, Try Loctite 444 instant adhesive and accelerator: - Tak Pak 444 - Tak Pak accelerator 7452 Place a small amount of glue and brush it with the accelerator. It will bond instantly. regards matthew park SMT Manufacturing Engineer NII-Norsat International Inc. >>> Nick Nicolaides <[log in to unmask]> August 13, 1998 2:36 pm >>> Hi Tech Netters Our customer does not have time to write new procedures, so we are sending PWBs' with the attached battery hooked up to the PWB. The battery is not hot until the PWB is plugged into a mother board. Thus only a small amount of leakage is occurring during transit. The wires go through to the solder side and cutting them back only protrudes slightly above the board. The customer wants these wires protected. The customer will not accept tape. We are thinking of some type of adhesive. It must dry fast, be reworkable, and readily available. We need to ship like now. what can we do! ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################ ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################