In addition to that we did following more things: 1> Put in all the past experience we have had into this 2> And , also used our m/c capabilities in account to customize it further ---------- From: Paul Stolar [SMTP:[log in to unmask]] Sent: Tuesday, June 02, 1998 11:14 AM To: [log in to unmask] Subject: Re: [TN] GEN:DFM Content-Transfer-Encoding: 7bit What we did in a previous incarnation is to use one of the several commercial DFM guides available as the basis. Then we wrote an exception document to supplement it. It makes life much easier than writing the whole thing yourself. ______________________________ Reply Separator _________________________________ Subject: [TN] GEN:DFM Author: [log in to unmask]> Larry Davis <[log in to unmask] at internet Date: 6/2/98 8:07 AM We are trying to write a Design for Manufacturability assembly and test specification and were wondering if anyone out there that has been down this road has any advice for us. Possibly even sharing your document so that we can see how it is set up and what it encompasses. Thanks in advance for your help! Larry Davis WGC Ft. Collins, CO 970-498-3298 ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################ ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################ ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################