While evaluating training tools, don't forget to check out the IPC videos and CDs, of which there are MANY. The newer ones come with a training manual. The CDs are interactive. Patty ---------- From: Tom Moore To: [log in to unmask] Subject: [TN] IPC Certification Date: Thursday, April 30, 1998 8:47PM Technetters, Looking for some opinions on training. We are a small captive board assembly house builing thru hole boards of our own design. We started using IPC standards (A-610) about 5 years ago when we found the MIL standards lacking. Training on both soldering and acceptance criteria has consisted mostly of RTM (Raed the Manual). We are looking to raise the skill level of our operators by certifing a Class A instructor and bringing the training in house. It is our hope that with effective training we can back down from our 100% visual inspection standard. Anyway my questions: 1. Which standard should we train and certify to, A-610 or J-STD-001? 2. Of the approved third party trainers which is the "best" one for the money? 3. Is the 18 month recertification necessary? What's the impact of not doing it? Thanks for this great forum. Tom Moore ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information. For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311 ################################################################ ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information. For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311 ################################################################