Are you really looking for a solder resist that will adhere to the molten metal surface? I would not recommend solder resist over a meltable surface. Try SMOBC. Al Cash > ---------- > From: Byrns Nancy[SMTP:[log in to unmask]] > Reply To: TechNet E-Mail Forum.;Byrns Nancy > Sent: Wednesday, May 06, 1998 8:43 AM > To: [log in to unmask] > Subject: [TN] IPC-D-275 conductor width .100" > > Hi everybody > > We have Rigid Printed Board, class 3 for military we need to do. > We refer to IPC-D-275 paragraph 5.5.1 solder resist coating because we > have a conductor width 0.100" and the coating completely cover this > conductor. > We want to know which pattern we should use to have a good solder resist > coating adhesion to the melting metal surface?? > Which pattern are normally use in production for those conductor width?? > > Thanks you, > Nancy Byrns > Oerlikon Aerospace > > ################################################################ > TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c > ################################################################ > To subscribe/unsubscribe, send a message to [log in to unmask] with > following text in the body: > To subscribe: SUBSCRIBE TechNet <your full name> > To unsubscribe: SIGNOFF TechNet > ################################################################ > Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional > information. > For the technical support contact Dmitriy Sklyar at [log in to unmask] or > 847-509-9700 ext.311 > ################################################################ > ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information. For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311 ################################################################