I would add that the three qualification profiles are also available at no charge if downloaded off the IPC web site (www.ipc.org/html/downloads.htm). Descriptions of each follow. IPC-1710, OEM Standard for Printed Board Manufacturers' Qualification Profile Developed by the OEM council of the IPC, the MQP sets the standard for assessing PWB manufacturers capabilities and allows PWB manufacturers to more easily satisfy customer requirements. IPC-1720, Assembly Qualification Profile Developed by the OEM council of the IPC, IPC-1720 categorized an electronic assembly manufacturer's capabilities and supplies the OEM customer with detailed, substantive information. IPC-1730, Laminator Qualification Profile The IPC-1730 categorizes a laminator manufacturer's capabilities. Used for single or multiple sites or locations, it eases auditing processes and reduces the frequency of audits, thereby decreasing paperwork and enhancing effectiveness. The program includes a description, approval and certification profile, and a quality profile. Mike Buetow Communications Manager ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information. For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312 ################################################################