-----Original Message----- From: John Waite <[log in to unmask]> To: Byrns Nancy <[log in to unmask]> Date: Tuesday, April 07, 1998 6:14 PM Subject: Re: [TN] IPC-A-600 >Hi Nancy, > IPC-A-600 is a commercial acceptability specification. If you are >dealing with Aerospace and Military applications, you cannot use this as a >reference too. You MUST obtain and utilize a PWB facility that is certified >and manufactures product in accordance with Mil-P-55110 ( I believe it is >still used). You can try calling DESC in Dayton Ohio, or talk to Jack at >IPC for a number. Whatever you do, do NOT reference the above document for >Mil Spec level product. If the product does not need to be certified to Mil >Spec, then you can simply state that "the product shall be manufactured in >accordance with Mil-P-55110, but certification is not necessary". This may >ease the cost for any prototypes you are looking for. If you Email me, I >will give you my number and we can discuss further, or connect to the link >below to my web page (will not be on the TechNet copy). Good luck JOHN >-----Original Message----- >From: Byrns Nancy <[log in to unmask]> >To: [log in to unmask] <[log in to unmask]> >Date: Tuesday, April 07, 1998 3:38 PM >Subject: [TN] IPC-A-600 > > >>I am a new learner in this IPC world and I have some concern. >> >>I need more information about IPC-A-600. Do we need to mention to the >>manufacturer who fabricate the board to be conform to this standard? or >>all manufacturer is conform to it? I would like to know if this standard >>is for military rigid printed wiring board(class 3)? I would like to >>know if IPC-A-600 is include in others IPC documents? >> >>Thanks you to help me in my job >>Nancy Byrns >>Electrical Engineer >>Oerlikon Aerospace >> >>################################################################ >>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c >>################################################################ >>To subscribe/unsubscribe, send a message to [log in to unmask] with following >text in the body: >>To subscribe: SUBSCRIBE TechNet <your full name> >>To unsubscribe: SIGNOFF TechNet >>################################################################ >>Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional >information. >>For the technical support contact Dmitriy Sklyar at [log in to unmask] or >847-509-9700 ext.311 >>################################################################ >> > > ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information. For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311 ################################################################