Chris_Smith wrote: > > All, > My company is contemplating switching to the sls65 flux for our wave > solder processes. We are currently using Alpha Metals NR210X no > clean, but are not completely satisfied with the results. A year or > so ago (before I came on)the company ran a 55 gallon drum of SLS65 > flux through one of our solder waves. From what I've heard and read > it was a tremendous success with eliminating solder defects (mainly > solder balls). However, I myself have no history with this flux and > was hoping that some of you who do can give your input. Please let me > know what you think. > > Thanks > Chris Smith M.E. > > ################################################################ > TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c > ################################################################ > To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: > To subscribe: SUBSCRIBE TechNet <your full name> > To unsubscribe: SIGNOFF TechNet > ################################################################ > Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information. > For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311 > ############################################################## Hi cris. I prove sls65 and I have a great results to elimanate solder balls in mother board. you need to crontrol the spray flux & preheat zone 90 to 100 deg.c. when i run my product i dont have more than 160 deg. in the peak and i eliminate the solder ball. I think this product it's good. ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information. For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311 ################################################################