Charles Barker@I-O INC 02/25/98 07:45 AM Chris, will this be a one-time-deal? Or an ongoing process? How many 1206 parts per assembly? Do you have an oven for cure or access to UV or can you wait for room temp cure? Pin transfer can be done on many pick and place machines, various mechanical hand dispensers are available as well as pnuematic ones. Then there is always the stencil process or the automated dispense machines. Please respond to [log in to unmask]; Please respond to [log in to unmask] To: [log in to unmask] cc: (bcc: Charles Barker/US/I-O INC) Subject: [TN] Need inexpensive method of glueing parts on PCB To help streamline a product upgrade process, I am looking for am inexpensive glue/dispenser combination suitable for gluing down 1206 style components by hand. any recommendations will be appreciated. <><><><><><><><><><><><><><><><><><> Chris Stack Project Manager dB-tronics, Inc. 145 Tradd Street Spartanburg SC 29301 Ph. (864) 574-0155 ext 115 Fax (864) 574-0383 http://www.dbtronics.com Supporting Broadband Networks Worldwide <><><><><><><><><><><><><><><><><><> ################################################################ TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c ################################################################ To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TechNet <your full name> To unsubscribe: SIGNOFF TechNet ################################################################ Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information. For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311 ################################################################