Ken, I guess the question I would have to ask is why would you put this on your drawing? Typically the board manufacturer will manufacture the parts according to the tooling provided. If you place thermal on your artwork or Data, then they should be there when the parts are delivered. If you don't, then they wont. Are you wanting to place this on your drawing as an instruction to the board shop to insure you have not made a mistake in your design or lay out the CAD data.? In any case, regardless what you decide, the manufacturer is obligated to meet your drawing requirements but I don't feel you should expect the board shop to be totally responsible for detecting supplied design or cad errors. Ed Cosper Director Quality Assurance and Engineering Graphic Electronics Inc. ---------- From: Ken Patel[SMTP:[log in to unmask]] Sent: Wednesday, January 14, 1998 1:13 PM To: [log in to unmask] Subject: [TN] Thermal Relief at Ground/Power Plane Connections Friends over the world, Is there any problem spelling out "ALL GROUND/POWER PLANE CONNECTIONS SHOULD HAVE THERMAL RELIEF " on my fab drawings. Please provide me pros and cons before I make a call. Your help is greatly appreciated. re, ken patel ______________________________________________________ Ken Patel Phone: (408) 490-6804 575 Cottonwood Dr. Fax: (408) 490-6859 Milpitas, CA 95035 Beeper: (888) 769-1808 ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311 ############################################################## ############################################################## TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c ############################################################## To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body: To subscribe: SUBSCRIBE TECHNET <your full name> To unsubscribe: SIGNOFF TECHNET ############################################################## Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information. For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311 ##############################################################