Marti, If the pad is the same width as the lead, you can't form side fillets. Per the PWB Design guidelines we have a minimum of 1.5 mils on each side on our 20 mil pitch and even more at larger pitches. There's and equation used for each lead with and type. Since 45 degree screening is not an option, consider squeegee pressure, speed, and material for optimum solder on axis usually low on volume. Are using fine pitch paste which has smaller particles than regular SMT paste. Mike Robinson ---------- From: Tully, Marti (AZ15) To: [log in to unmask] Cc: Smith, Gary (AZ15); Robinson, Mike (AZ75); Cluff, Kevin (AZ75); Nachbor, Suzanne (MN51) Subject: Assy & Design SMT