At 01:34 PM 8/15/97 -0700, you wrote: > It seems many questions to this forum do not give enough info >for a good answer, so here is my attempt (I hope this is clear enough). > > I am in the process of designing a new product and would like to >automate the calibration. At present on a similar product we use solder >jumpers (lack of a better name) to short 1 of 3 possible gain resistors >into the circuit. Does anyone out there know of a fusible link or >anti-fuse (again lack of a better name) that would be usable with the >following criteria: > >1. SMT >2. Circuit operates in the less than 10mA range (link must fuse in 100mA >to 500mA range) >3. Available for high volume production (if this works it could go into >the millions of units per year) > > >So as to not clog the net, please contact me off-line and I will post >findings later for other interested parties. > >Frank N Kimmey >EM Designer >C&K Systems, Inc. >(916) 353-5366 >[log in to unmask] > >Thanks for the help! >FNK > If you get a reply to this I would appreciate either being copied or post it to the list. Thanks Fred Pescitelli Phoenix Designs 1285 Turner Rd. Lilburn, GA 30047