X-Mozilla-Status: 0001 Message-ID: <[log in to unmask]> Date: Sun, 13 Jul 1997 16:34:32 -0700 From: Bogdan Gaby <[log in to unmask]> Organization: Tadiran Telecommunactions Ltd. X-Mailer: Mozilla 2.02 (Win16; I) MIME-Version: 1.0 To: [log in to unmask] Subject: Alloy 42 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello,TechNetters! I need the following information: 1.What is DIFFERENT between a solder joint Alloy 42 /SnPb and solder joints of brass or phosphor bronze leads? 2.How does the solderability of Alloy 42 compare to brass or bronze or nickel? 3.In order to check the strength of solder joints,Iwould like to perform some vibration and thermal shock tests .Are there papers on alloy 42 ? What standards should I use? 4.Is there a special technology recommended for Alloy 42 reflow soldering? Thank you Gaby *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message [log in to unmask]> * * with and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************