You may want to look at the package from INSET called HiJacK. This will convert from/to numerous formats. I could be of more help if I knew the desired format. Most CAM stations will have a HPGL input also. NEil D.. At 09:52 AM 7/31/97 PST, Erik Bodell wrote: >Hello Technetters, >We are seeing an increasing amount of graphics files >(fabrication prints) in HPGL2 format. Does anyone >know of any software that may be used to convert and >view HPGL2? >Thank you, >Erik Bodell >Compeq International, Salt Lake City, Utah > > >*************************************************************************** >* TechNet mail list is provided as a service by IPC using SmartList v3.05 * >*************************************************************************** >* To subscribe/unsubscribe send a message <to: [log in to unmask]> * >* with <subject: subscribe/unsubscribe> and no text in the body. * >*************************************************************************** >* If you are having a problem with the IPC TechNet forum please contact * >* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * >*************************************************************************** > > ____________________ / /\ / Neil Diamond / \ / [log in to unmask] / \ /___________________/------\ *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message <to: [log in to unmask]> * * with <subject: subscribe/unsubscribe> and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************