>>> Gary Bliss <[log in to unmask]> 06/25/97 07:19pm >>> Does anyone have information on soldering to nickel plated aluminum? I have seen an RF shield in a motorola cell phone which was reflowed sucessfully with no clean solder paste and I have never been able to reproduce this in my facility. Please respond to the above address. Thanks, Denis Meloche >>> We have had some success with reflow soldering shields for RF applications, however we are not using nickel platted aluminium. We are using 26000 alloy brass with an electroplatted tin finish. Jeffrey McGlaughlin BFGoodrich Avionics Systems Inc. Columbus Ohio *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message <to: [log in to unmask]> * * with <subject: subscribe/unsubscribe> and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************