I'm the test engineer for a PCB manufacturere (of course) and I've been trying to find some information. Unfortunately all the traditional resources haven't been able to help me so I'm hoping somebody reading this mailing list will be able to point me in the right direction. I'm trying to upgrade our dedicated open/short electrical testers that are in our final test area. Currently we have our operators T-stamp every board that passes. We would like to take this out of the operator's control to reduce electrical escapes. I've been thinking of putting some kind of ink-jet sprayer into every fixture we build. When the board passes, the computer will send a signal to this sprayer and it will spray a T-stamp onto the board. I was thinking of putting something like what Coke uses to spray lot and production numbers on the bottom of their aluminum cans or a sprayer that puts the date code on the side of plastic 1 gallon milk jugs. Unfortunately, Coke won't give me that information. I think that this will work pretty well, assuming that the sprayer head is small enough to fit into a fixture. We've played with other ideas such as using a self inking T-stamp connected to a servo motor or solenoid. I'm not really enamored with this idea for various reasons. So, if anybody has attempted this before, or could point me towards a supplier for these sprayers I would be very grateful. Please email me with any information you may have since I don't subscribe to the mailing list (I'm using my personal account which has a limited amount of mail space while my company is setting up my email address). Cheers. Roger Su | [log in to unmask] | "Cycle tracks will abound in Utopia." [log in to unmask] | | - H.G. Wells *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message <to: [log in to unmask]> * * with <subject: subscribe/unsubscribe> and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************