Richard,
     
     We currently use Dow Corning 1753 silicon conformal coat with the 
     Nordsen select coat system (we also use an inline spray system).  We 
     have not had any problems with this, its been a very good coat for us.
     Please call if you want more specifics (or contact Dow Corning, as 
     they have done case studies on us).
     
     Chris Messner
     UT Electronic Controls
     219-358-3429


______________________________ Reply Separator _________________________________
Subject: Assy: conformal coating
Author:  "Blanchet;Richard" <[log in to unmask]> at Internet
Date:    5/28/97 9:51 AM


     
Hello,
     
I'm looking for any information concerning solvent-free conformal coating 
application process (products, articles, advices, suppliers, experience, 
etc.). Thank you.
     
Richard Blanchet
Canadian Marconi
[log in to unmask]
     
*************************************************************************** 
* TechNet mail list is provided as a service by IPC using SmartList v3.05 * 
*************************************************************************** 
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   * 
* with <subject: subscribe/unsubscribe> and no text in the body.          * 
*************************************************************************** 
* If you are having a problem with the IPC TechNet forum please contact   * 
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      * 
***************************************************************************
     

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************