In message <[log in to unmask] >, scott birnbaum <[log in to unmask]> writes >Does anyone have information on testing unpopulated pwb's with high >current (several amps?) with the intent of stressing each trace to >"blow" any near opens. Is there automated equipment to do this? What >are the potential pitfalls? > >thanks > >*************************************************************************** >* TechNet mail list is provided as a service by IPC using SmartList v3.05 * >*************************************************************************** >* To subscribe/unsubscribe send a message <to: [log in to unmask]> * >* with <subject: subscribe/unsubscribe> and no text in the body. * >*************************************************************************** >* If you are having a problem with the IPC TechNet forum please contact * >* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * >*************************************************************************** > Dear Mr Birnbaum. A company called READ Electronics based in Japan produces such test equipment. If you contact me with your mailing adress I shall have information sent to you. Thanks. -- jake kelly *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message <to: [log in to unmask]> * * with <subject: subscribe/unsubscribe> and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************