We are in the design stage of a new program and the designer is using 
     a small pcb in the system. The problem I see is the board is .800" x 
     2.2"  with a couple of components on it.  The components are no closer 
     that .250 from the edge and the board thickness is .028.  In the past 
     when we have "V" scored small boards and then broken them away after 
     population. We have had solder joints  fracture and a large amount of 
     rework.  My question is, is there a distance that a component must be 
     from the edge of a board when using "V" scoring to prevent damage to 
     solder joints during board separation.

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************