Hi Jeremy, if you don't mind please send me the details about this technology. Thanks, Tamir ______________________________ Reply Separator _________________________________ Subject: RE: MicroVias supplier wanted Author: [log in to unmask] at INTERNET Date: 13/5/97 9:47 AM Luc, At D2D in we have the capability to produce prototype quantities of micro via boards using laser ablation in a variety of materials. I have sent a seperate e-mail direct to you with further details. regards, Jeremy Drake Design to Distribution Ltd. Stoke on Trent, England. *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message <to: [log in to unmask]> * * with <subject: subscribe/unsubscribe> and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * *************************************************************************** *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message <to: [log in to unmask]> * * with <subject: subscribe/unsubscribe> and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************