We also need info on this. Our facility is handling variety of boards and many a times, we come across same fab being used in no. of assemblies and that creates confusions on floor. We need info on real good method of labeling the bare boards at start of process. The system should be able to handle high variety, various sizes and low quantities and label can bear mixed process -smt and throughhole. provide info directly-if necessary. [log in to unmask] thanks ---------- From: [log in to unmask] To: [log in to unmask] Subject: Labeling of PC Boards - Comments Date: Thursday, May 01, 1997 5:50PM I would like to chat about the methods used to identify PC boards (as well as electronic components) and specifically about the use of printer/applicators which are used to print and automatically apply labels for these applications. We are doing a study on this subject and your opinions, overviews, etc. will be most helpfull. I can be reached at [log in to unmask] or 800-903-9007. You can leave your comments and/or how I might be able to call you back to chat. Thanks for your assistance. George Gilfoil Managing Director CB Consultants 21 Richards St. So. Portland, ME 04106 *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message <to: [log in to unmask]> * * with <subject: subscribe/unsubscribe> and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * *************************************************************************** *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message <to: [log in to unmask]> * * with <subject: subscribe/unsubscribe> and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************