Subject: FWD>ASSY: What is an HSOP ? 1997.05.292:07 PM Hello TechNet, I am resending. Original message bounced back. I apologize if it appears twice. Charles. -------------------------------------- Date: 1997.05.29 2:12 PM From: Charles Elliott Hello TechNetters, I have come across a package type (plastic package) called an HSOP. I am not familiar with this type of package. It has a large exposed heatsink area on the bottom which is 0.002 to 0.008" thou above the seating plane (0.050 to 0.200mm for metric folk). Does this heatsink area have to be soldered or attached with some adhesive to the PCB for better thermal performance ? Is this required ? What are your experiences with this package ? If you have experience with assembly of this type of device, your inputs would be appreciated. Regards, Charles Elliott NPI Process Engineering Newbridge Networks Corp. [log in to unmask] Phone (613) 591-3600 *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message <to: [log in to unmask]> * * with <subject: subscribe/unsubscribe> and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************