Received: from mailhost.MSAnet.com by smtpgate.msanet.com (ccMail Link to SMTP R6.00.01) ; Thu, 01 May 97 04:04:56 -0500 Return-Path: <[log in to unmask]> Received: from simon.ipc.org (www.ipc.org) by Mailer (5.x/SMI-SVR4) id AA08126; Thu, 1 May 1997 04:07:55 -0400 Received: from ipc.org by simon.ipc.org via SMTP (940816.SGI.8.6.9/940406.SGI) id CAA01039; Thu, 1 May 1997 02:47:12 -0700 Resent-Date: Thu, 1 May 1997 02:47:12 -0700 Received: by ipc.org (Smail3.1.28.1 #2) id m0wMlBd-000BjTC; Wed, 30 Apr 97 21:01 CDT Resent-Sender: [log in to unmask] Old-Return-Path: <[log in to unmask]> X-Sender: [log in to unmask] Message-Id: <v03007805af8da9481ffc@[129.46.191.125]> In-Reply-To: <[log in to unmask]> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Date: Wed, 30 Apr 1997 19:05:03 -0700 To: [log in to unmask], [log in to unmask] From: Phil Bavaro <[log in to unmask]> Subject: Re: CCA Jumper Adhesive Cc: [log in to unmask], [log in to unmask] Resent-Message-Id: <"Jh_4U1.0.T7L.ja_Pp"@ipc> Resent-From: [log in to unmask] X-Mailing-List: <[log in to unmask]> archive/latest/12362 X-Loop: [log in to unmask] Precedence: list Resent-Sender: [log in to unmask] We also use Dymax. The product number is 628Gel and it is a multicure adhesive (UV, Heat, or air cure). We use the gel primarily for staking components down to boards, but it also works great on the teflon insulation used with some jumper wires. I would recommend that you try the new visible light cure version of the same animal. It basically just speeds up the cure cycle from fast to real fast. Of course UV cure cycles depend on the amount of energy you put into them. We use the large floodlamp for big items, but you should definitely use one of the fiber optic wand style curing systems for jumper wires. At 1:37 PM -0400 4/30/97, [log in to unmask] wrote: > Regan... > We have been using a modified epoxy adhesive or an > ultra-violet light curable urethane adhesive (one for assembly, > the other for modifications/rework) on our pwb assemblies for > many years with excellent results. I don't know if these companies > are still around (I'am getting the info off of some old drawings), > but you can probably check the internet. Your best bet is to talk > to them about your requirements and maybe test a few of their products. > > Regards, > Bob > Mereco Division > Metachem Resins Corp Bob Vanech > West Warwick, RI. Norden Systems > (800) 556-7164 > > Bacon Industries > Watertown, Ma > (617) 926-2550 > > Dymax Corp > 51Greenwoods Rd. > Torrington, Ct > (Sorry, don't have > a number) > >*************************************************************************** >* TechNet mail list is provided as a service by IPC using SmartList v3.05 * >*************************************************************************** >* To subscribe/unsubscribe send a message <to: [log in to unmask]> * >* with <subject: subscribe/unsubscribe> and no text in the body. * >*************************************************************************** >* If you are having a problem with the IPC TechNet forum please contact * >* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * >*************************************************************************** Regards, Phillip A. Bavaro Senior Manufacturing Engineer [log in to unmask] (619) 658-2542 *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message <to: [log in to unmask]> * * with <subject: subscribe/unsubscribe> and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************