Text item: try UniCad @ www.unicad.com ---------------------------------------------------------------- I'm looking for EMC software to be run on an IBM PC compatible in Win 95 environment. I will be using the requirements of this software to justify the machine on which it's to be used. The software is not to be used in an EMC lab, so implementation with actual testing is not what's needed. Specifically, I'm looking software that will run a simulation at the board level with a high degree of accuracy. So I guess the software would have to accept some board layout software in order to run the simulation. My specific ability is in pc board construction techniques that have been crosschecked at a lab after the boards are made. This software would greatly help. Anyone have any leads? Private emails welcome. ************************************************************ ------------------------------------------------------- The comments and opinions stated herein are mine alone, and do not reflect those of my employer. ------------------------------------------------------- ************************************************************ *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message <to: [log in to unmask]> * * with <subject: subscribe/unsubscribe> and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * *************************************************************************** Text item: External Message Header The following mail header is for administrative use and may be ignored unless there are problems. ***IF THERE ARE PROBLEMS SAVE THESE HEADERS***. Resent-Sender: [log in to unmask] Precedence: list X-Loop: [log in to unmask] X-Mailing-List: <[log in to unmask]> archive/latest/11684 Resent-From: [log in to unmask] Resent-Message-ID: <"OsonB.0.2xG.fEyGp"@ipc> Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=us-ascii Subject: EMC Software To: [log in to unmask] MIME-Version: 1.0 X-Mailer: Mozilla 3.01 (Win95; I) Organization: Paragon Networks Int'l Reply-To: [log in to unmask] From: [log in to unmask] (Doug McKean) Date: Thu, 03 Apr 1997 09:54:36 -0500 Message-ID: <[log in to unmask]> Old-Return-Path: <[log in to unmask]> Resent-Sender: [log in to unmask] Received: by ipc.org (Smail3.1.28.1 #2) id m0wCnqP-000Bk6C; Thu, 3 Apr 97 08:50 CST Resent-Date: Thu, 3 Apr 1997 11:27:44 -0800 Received: from ipc.org by simon.ipc.org via SMTP (940816.SGI.8.6.9/940406.SGI) id LAA28505; Thu, 3 Apr 1997 11:27:44 -0800 Received: from simon.ipc.org by calliope.fm.intel.com (8.8.4/10.0i); Thu, 3 Apr 1997 17:44:49 GMT Received: from calliope.fm.intel.com (calliope.fm.intel.com [132.233.247.7]) by fmmail.fm.intel.com (8.8.5/8.7.3) with ESMTP id KAA16871 for <DavidX_Schlice@ccm .ch.intel.com>; Thu, 3 Apr 1997 10:24:49 -0800 (PST) Return-Path: [log in to unmask] *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message <to: [log in to unmask]> * * with <subject: subscribe/unsubscribe> and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************