HyperSuite made by PADS software has a good windows based program for this. Alan B. Cochrane Director of New Technology Multek Inc. ______________________________ Reply Separator _________________________________ Subject: EMC Software Author: [log in to unmask] at INTERNET_GATEWAY Date: 4/3/97 8:53 AM I'm looking for EMC software to be run on an IBM PC compatible in Win 95 environment. I will be using the requirements of this software to justify the machine on which it's to be used. The software is not to be used in an EMC lab, so implementation with actual testing is not what's needed. Specifically, I'm looking software that will run a simulation at the board level with a high degree of accuracy. So I guess the software would have to accept some board layout software in order to run the simulation. My specific ability is in pc board construction techniques that have been crosschecked at a lab after the boards are made. This software would greatly help. Anyone have any leads? Private emails welcome. ************************************************************ ------------------------------------------------------- The comments and opinions stated herein are mine alone, and do not reflect those of my employer. ------------------------------------------------------- ************************************************************ *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message <to: [log in to unmask]> * * with <subject: subscribe/unsubscribe> and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * *************************************************************************** *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message <to: [log in to unmask]> * * with <subject: subscribe/unsubscribe> and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************