Thanks Gary, could you provide me with a description of the LPI solder mask, I am not familiar with this. ---------- From: TechNet-request To: TechNet Subject: re: FIDUCIALS Date: Wednesday, March 12, 1997 12:00AM Darrell: Our in house assembly shop asks that we leave the fiducials covered with solder mask. They claim this reduces reflections and their equipment can find the fiducials much easier. We use LPI solder mask. gary ... *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message <to: [log in to unmask]> * * with <subject: subscribe/unsubscribe> and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * *************************************************************************** *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To subscribe/unsubscribe send a message <to: [log in to unmask]> * * with <subject: subscribe/unsubscribe> and no text in the body. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************