Hello Olly and Technetters,

Could you tell me what is LQFP ?. And I am not too sure the meaning of
"thicker version" of the std QFP....

The interesting part is that it only happened on only one part number, 
and the board contains other  QFPs of other vendors, but no problem.

Any idea ???

----------------------------------------------------------------------------
----------------------



At 09:25 AM 3/25/97 GMT, you wrote:
>Hi Poh, 
>
>I've heard of this where a 14x20 LQFP was used. Basically
>a combination of internal TCE mismatch and absorbed 
>moisture caused the bowing through reflow.
>	The 'fix' was to move to a thicker version of the
>same part (std QFP).
>
>regards
>
>Olly
>

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************