Normally the clearance for photo image is 5-6 thou and 10 thou for screen print. That is often used for both through hole and surface mount and test pads. It needs to be bigger for fiducial marks. Bob Willis Process Engineering Consultant Electronic Presentation Services 2 Fourth Avenue, Chelmsford, Essex CM1 4HA. England. Tel: (44) 01245 351502 Fax: (44) 01245 496123 Home Page: http://ourworld.compuserve.com/homepages/Bwillis Email: [log in to unmask] *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To unsubscribe from this list at any time, send a message to: * * [log in to unmask] with <subject: unsubscribe> and no text. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************