> Is somebody really providing any type of pulse plating > still?? I thought those things proved to not work YEARS > ago. This was so long ago, I forgot what (so called) > advantages they were supposed to provide over standard > rectification. > Worked fine for me a few years ago on a deep nickel - gold (hard) line. I used it to get shorter plating times, less dryfilm attack, a little better leveling. Main problem was the variable time of each pulse on the supply was very short for board plating applications; used the longest pulses I could set & could have used a little longer. Peak power only allowed one panel at a time too. Tom Waznis Hallmark Circuits Inc. San Diego *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To unsubscribe from this list at any time, send a message to: * * [log in to unmask] with <subject: unsubscribe> and no text. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************