Jim: Joint Electron Device Engineering Council 2500 Wilson Blvd. Arlington, VA 22201 P: 703-907-7560 F: 703-907-7501 Staff director: Ingrid Taylor Mike Buetow IPC Technical Staff 2215 Sanders Road Northbrook, IL 60062 P: 847-509-9700, ext. 335 F: 847-509-9798 [log in to unmask] On Thu, 30 Jan 1997, Jim Moffit wrote: > Gents, Can someone help me define the basis for "low profile device" and > "high profile device" as used in J/STD-001B and A-610B. I believe that the > terminology is based on an old JEDED definition. Seems to me that "high > profile" was anything that is more than 0.15mm above the pwb surface. The > phone number I have for JEDEC is no good, can't find them on the Net, and > would like to talk to them about the definition. Thanks in advance for any > assistance you can provide. Jim Moffitt/EMPF > > *************************************************************************** > * TechNet mail list is provided as a service by IPC using SmartList v3.05 * > *************************************************************************** > * To unsubscribe from this list at any time, send a message to: * > * [log in to unmask] with <subject: unsubscribe> and no text. * > *************************************************************************** > * If you are having a problem with the IPC TechNet forum please contact * > * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * > *************************************************************************** > > *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To unsubscribe from this list at any time, send a message to: * * [log in to unmask] with <subject: unsubscribe> and no text. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************