Give Greg Miller at Alpharetta GA at call at 770-475-6100 x 322. He should be able to get you to the right person. Dave Hillman Rockwell Collins [log in to unmask] ______________________________ Reply Separator _________________________________ Subject: ASSY More info on Omegameter 600SMD problem Author: [log in to unmask] at ccmgw1 Date: 5/14/96 2:19 PM Thanks for the responses to my request and for asking for more information on our problem. Details are as follows. The Omegameter wouldn't clean up. The resistance readings keep changing during the clean process.We started by changing the DI tubes, then the probe, then the fluid. We did find that heating the microprocessor board and a pot board that the unit would work. We also cleaned board connections and re-seated the boards. The unit was working until a recent move across the room. We changed the fluid one again. This didn't solve the problem. We then changed the mico board with no positive results. We are ready to move the unit back to the last "known good location" and see if proper function returns. Is there a guru out there for the Omegameter 600SMD? Thanks once more. Rick Vernon, Sr. QA Engineer [log in to unmask]