The only precaution I would give is to be sure any inner layer copper is kept far enough away from the board egde to compensate for the chamfer. /\ /\/\ /\/\/\ /\/\/\/\ Praegitzer Design ---------- The Fine Line in Design Tom Witten Operations Manager email: [log in to unmask] voice: (503)531-2050 ext. 1810 fax: (503)531-2051 (hard copy) modem: (503)531-2055 (open system) > From [log in to unmask] Wed Jul 10 18:12:00 1996 > Resent-Date: Wed, 10 Jul 1996 20:07:53 -0700 > Resent-Sender: [log in to unmask] > Old-Return-Path: <[log in to unmask]> > Date: Wed, 10 Jul 96 19:07:44 > From: "Walker, Don" <[log in to unmask]> > To: [log in to unmask] > Subject: Re: Gold Fingers > Resent-Message-Id: <"02LXi1.0.-2K.Lv4vn"@ipc> > Resent-From: [log in to unmask] > X-Mailing-List: <[log in to unmask]> archive/latest/1843 > X-Loop: [log in to unmask] > Resent-Sender: [log in to unmask] > Content-Length: 846 > > > There is absolutly no generic reason I can think of why a plane should > not extend under the gold edge card fingers. I have done it for years > with no problem at all. Especially if you are working on EMI critical > designs you would not want to have a big hole in your shielding created > by removing the planes from an area of the board. > > Don Walker > Austron Inc. > [log in to unmask] > > **************************************************************************** > * The mail list is provided as a service by IPC using SmartList v3.05 * > **************************************************************************** > * To unsubscribe from this list at any time, send a message to: * > * [log in to unmask] with <subject: unsubscribe> and no text. * > **************************************************************************** > > **************************************************************************** * The mail list is provided as a service by IPC using SmartList v3.05 * **************************************************************************** * To unsubscribe from this list at any time, send a message to: * * [log in to unmask] with <subject: unsubscribe> and no text. * ****************************************************************************