Date: Tues, 27 Aug 96 09:44:38 From: [log in to unmask] Subject: Re:Comparison of ANSI/J-STD-001A to Mil-Std-200A To: mx%"[log in to unmask]" Cc: My company, FMC United Defense Armament Systems Division, Minneapolis, MN is in the process of transitioning to the ANSI/J-Std-001A spec. Part of transition involves preparing a "block proposal change" to incorporate the new spec into our current contracts. This requires that a technical comparison be done between ANSI/J-Std-001A vs Mil-Std-2000A. Please advise as to any existing technical comparion that might exsist. Sincerely, Walter R. Gonzalez OTL/ME, Electrical Manufacturing Unit. Hello Walter, Welcome to the "Club." We are in the final block change steps of transistioning MIL-Q-9858 to ISO 9001. MIL-STD-2000A to J-STD-001 is next on our agenda. I recently obtained a list of other companies who are also going through this process that I'll share with you. Unfortunately, this list contains only the DCMC CAO point of contact. Hopefully, as defense contractors we can start up a "network" to support one another through this block change process. Daniel Epperson, Quality Engineering Manager (817) 234-6670 Fax: (817) 234-6768 EFW Inc. 4700 Marine Creek Parkway P.O. Box 136969 Fort Worth, Texas 76136-6969 *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To unsubscribe from this list at any time, send a message to: * * [log in to unmask] with <subject: unsubscribe> and no text. * ***************************************************************************