The debate of wet lamination has been going on for years and won't be finalized for many more to come. The pro's and con's vary depending on who you talk to and how successful they have been with wet lam. Basically, wet lam is supposed to increase your adhesion and conformation of dry film, but if your lamination and preclean processes are in control, you can obtain excellent dry film adhesion and conformation without the additional process of wet lam. In addition, not all dry films have the compatibility with wet lam, therefore the number of films available for wet lam are much less than those for conventional lamination. Morton does not push the wet lam process because it is seldom needed. We have always been able to solve adhesion and conformation problems with the correct combination of preclean, lamination, and dry film characteristics. If you have a wet lam process, conventional recommended lamination exit temperatures do not apply. You should be process at a much lower temperature than normal. Ken Bridges *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To unsubscribe from this list at any time, send a message to: * * [log in to unmask] with <subject: unsubscribe> and no text. * ***************************************************************************