======== Original Message ======== Sender: [log in to unmask] Received: from simon.ipc.org (IPC.ORG [168.113.24.64]) by arl-img-3.compuserve.com (8.6.10/5.950515) id LAA04432; Thu, 13 Jun 1996 11:29:44 -0400 Received: from ipc.org by simon.ipc.org via SMTP (940816.SGI.8.6.9/940406.SGI) id KAA17177; Thu, 13 Jun 1996 10:28:21 -0700 Resent-Date: Thu, 13 Jun 1996 10:28:21 -0700 Received: by ipc.org (Smail3.1.28.1 #2) id m0uUDfd-0000D4C; Thu, 13 Jun 96 09:46 CDT Resent-Sender: [log in to unmask] Old-Return-Path: <[log in to unmask]> Message-Id: <[log in to unmask]> X-Sender: [log in to unmask] X-Mailer: Windows Eudora Light Version 1.5.2 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Thu, 13 Jun 1996 09:52:25 -0400 To: [log in to unmask] From: Nick Garcia <[log in to unmask]> Subject: Re: Electroless Copper Resent-Message-ID: <"nvIjp.0.1J4.Kd2mn"@ipc> Resent-From: [log in to unmask] X-Mailing-List: <[log in to unmask]> archive/latest/4670 X-Loop: [log in to unmask] Precedence: list Resent-Sender: [log in to unmask] TechNet, Bill Foran, fulrl @ Boeing I am very surprised to hear about your problems with Shipley Electroless Copper. I am with Electro Plate Circuitry in Carrollton, Tx. We manufacture Military and High-Rel Commercial Multilayers. We have been using Shipley # 3350 Electroless Line for the past 7 years. We have had great success from a performance and support standpoint. We have found that when we do run into a problem, Shipley's tech support is at our facility within hours and solves the problem in a timely manner. We have always found that the problem is a result of something we did or did not do. Feel free to give me a call, If I cannot help you, I can put you in contact with someone who can. (214)466-0818. >Subject: Electroless copper >From: [log in to unmask] at Internet >Date: 6/12/96 7:41 AM > > > We have recently changed our Electroless Chemistries and Electrolytic > Copper to Shipley product line. We have been overwhelmed with scrap for > voids, plating separations and adhesion problems. We have followed the > vendor recommendations and are running within their guidelines. We need > some technical help. The support we've been receiving is not getting us > anywhere. Currently we are shut down for all production due to scrap > levels. HELP! > > Thank you =============================================================== Nicolas Garcia V.P. Operations Electro Plate Circuitry, Inc. ======== Fwd by: Tony King / N ======== I have also been using the Shipley 3350 electroless copper process for the last 6 years with very good success. We process primarily multi layer product 4 layer to 16 layer. The process yields well with no post separation and minimal deposition related voiding. Shipley support is very good and they can usually solve any problems quickly. Please call if you would like to discuss this more, I would be happy to talk with you. Tony King Elexsys International Inc Nashua N.H. 603-886-0066 [log in to unmask]