We are a facility that builds several different SMTcircuit card assemblies (50+). Presently we are in search of a way of possibly improving throughput from our screen printing operations. During the evaluation of this process we've concluded that the screening of (1) individual cca at a time contributes to our problem. Several of our assemblies are screened in a 10-12 up panel (12"x18") while others are single boards approx 3"x5". It's the printing of a single board which presents a problem. Our question; Is there anyone who is fixturing multiple single boards and printing several with one pass on a screen printer? Note: Unless someone has existing experience, we are not anticipating using this process for fine pitch (i.e. 25 mil or less) Any response is appreciated, Rick Raber Supervisor, MFG ENG ITT Industries - Aerospace/Communications Div. (219)487-5165 [log in to unmask]