Luis you could try Nova Drilling services in Santa Clara, Ca. ph: (408) 732 6682. They have drilled .010 holes in .125" thick panels for us. ______________________________ Reply Separator _________________________________ Subject: RE: FAB - Small Hole Drilling Author: [log in to unmask] at SMTPLINK-HADCO Date: 12/13/96 3:54 PM Does anyone know of a company that provides stand alone small hole drilling services? We need to have .008" diameter holes drilled on .125" thick 8-layer MLBs, with .016" diameter plane clearances and .004" wide spacing between traces and drilled holes. The pattern is that of a microBGA device with a .5 mm pitch and 176 holes. Internally, each hole will either connect directly to a plane or to a trace pad. Material is either FR-4 or polyimide. All copper weights are .5 oz copper. Many thanks, Luis Rivera CompuRoute, Inc. Dallas, TX [log in to unmask] (214) 340-0543 *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To unsubscribe from this list at any time, send a message to: * * [log in to unmask] with <subject: unsubscribe> and no text. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * *************************************************************************** *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To unsubscribe from this list at any time, send a message to: * * [log in to unmask] with <subject: unsubscribe> and no text. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************