From: Sasi Murthy 448-5688 (tie 778) Subject: Wire Cutting and Stripping Can anyone offer advice on this. Please respond directly to [log in to unmask] as this person does not have Technet access. Thanks in advance, Regards, Sasi Process Applications Engineer (416) 448-5688, fax (416) 448-4736 [log in to unmask] *** Forwarding note from PBOURGEO--TORVMFG1 12/12/96 16:41 *** To: SMURTHY --TORVMFG1 Murthy, S.K. (Sasi >From The Keyboard of Paul Bourgeois... Subject: Wire Cutting and Stripping Sasi, as per our conversation earlier today, I am looking for an alternative to our Komax Model 33 Wire Cutting and Stripping machine. Specifically, 90% of the wire that the machine cuts is 30 AWG teflon coated wire, and I would like to know if there is a machine that could be hard-tooled to specifically cut 30 AWG wire. I am interested only in machines that are capable of mass-producing cut wire: no hand tools would be feasible for our daily demands of roughly 4000 cut wires. One final equipment specification is reliablility and usability. The machine should be one designed specifically for industrial mass-production, along the same lines as the Komax Model 33. Some specifics for our applications: LOA of wire: 0.3"-10"+ Strip lengths: 0.03"-0.20" Wire Type: 30AWG Teflon Coated Average Cycle Time Demanded: Approx 100 wires / minute(or better) Price Range: $5,000-$15,000 for the machine (de-reelers and straighteners not required). Machine Features: Hard-Tooled Cutting Blade Specific to 30 AWG Wire. Thanks! /===/ /=| // // // |Paul Bourgeois (416)448-4712 // // //|| // // // |E-mail me : [log in to unmask] /===/ //=|| // // // |Celestica Dept 178 Office: 3M20T // // || /====/ /<==== |Now You're Playing With Power... *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To unsubscribe from this list at any time, send a message to: * * [log in to unmask] with <subject: unsubscribe> and no text. * *************************************************************************** * If you are having a problem with the IPC TechNet forum please contact * * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] * ***************************************************************************