Ron, try Loctite 384...... ______________________________ Reply Separator _________________________________ Subject: Re: ASSY: Heatsink Adhesives Author: [log in to unmask] at !INTERNET Date: 11/26/96 9:18 AM Wedemeyer, Ron wrote: > > We have an application were we need to bond a small heatsink to the top > of a plastic packaged device (bonding area is approx 1.0" x 0.5"). > We are undecided whether we should use a self adhesive thermally > conductive sheet material to bond the two together, or use a thermal > bonding compound (liquid adhesive). Due to the size and implementation, > mechanical methods of securing the heatsink are not suitable. > > Any advice or experiences people have had with either or both of the two > methods would be appreciated > > Ron Wedemeyer > Senior Engineer - Product Engineering > QPSX Communications Pty Ltd > [log in to unmask] > > *************************************************************************** Loctite has a full line of thermally conductive adhesives which could meet your application needs. Call 1-800-LOCTITE. There are activator cured and heat cured products available. *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To unsubscribe from this list at any time, send a message to: * * [log in to unmask] with <subject: unsubscribe> and no text. * *************************************************************************** *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To unsubscribe from this list at any time, send a message to: * * [log in to unmask] with <subject: unsubscribe> and no text. * ***************************************************************************