Hi Paresh....it depends how much u want to spend on a system like this, there are a lot of them out there....according do ur needs i would say try out 1> The theta group...seems to be a good machine....can do a bunch of stuff they have three models Vista, Verifier and Optima....all these m/c have the capability of real time SPC contact : ken Gribble 1 800 877 4874 2> The other company would be CR Technologies checks and verifies Component presence/Orientation/Correct part and a bunch of other stuff.. Ph 714 448 0443 Hope this helps...i don't work for them and the standard disclaimer applies.... mohit gujral ______________________________ Reply Separator _________________________________ Subject: Vision System Author: [log in to unmask] at uucpmail Date: 10/30/96 8:53 AM Good morning, We have a concern regarding potential of higher DPU at auto insertion when verifier is non-functional and operator loads one or more tubes of IC's or reels of components in the feeder. There is also a second related issue. Even when the verifier is working well, operator is required to do a TQC on the PCB's as final check at that operation. This TQC is very time consuming which in turns reduces productivity. I need your help in gaining knowledge and gathering information on any available vision system that would check for correct component in place. An efficient system should free us from worry when verifier is non-functional and increases productivity. Thanks for your help, Paresh Patel Oneac Corp. 847-816-6000 x-704. *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To unsubscribe from this list at any time, send a message to: * * [log in to unmask] with <subject: unsubscribe> and no text. * *************************************************************************** *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To unsubscribe from this list at any time, send a message to: * * [log in to unmask] with <subject: unsubscribe> and no text. * ***************************************************************************